|
Browse Helmets
by Brand
|
|
|
Sixsixone Flight II Off Road Helmets
- SIXSIXONE FLIGHT II HELMETS
|
|
|
|
|
|
|
|
|
Sixsixone - Flight II Legend Helmets
- The rear upper part of the boot is made up of the following mechanisms: TECNO CALF TENSIONER, TECNO SHIN TENSIONER and ANKLE SUPPORT SYSTEM. This group of features ensures a precise fit and maximum protection.
- The TECNO CALF TENSIONER mechanism adjusts the leg circumference. Placed in the back of the boots upper, it works through a nylon wire that hooks directly to the shin plate. The TECNO CALF TENSIONER is replaceable and it's available in different sizes to fit around various sizes of calf muscles.
- The TECNO SHIN TENSIONER mechanism helps the TECNO CALF TENSIONER close the leg upper on the front part of the boot. The two lateral nylon braces join the ankle joint with two screws that are protected by nylon caps. This system is reinforced with fiberglass, supports the ankle and is easy to replace. This system allows excellent flex movement front-to-back while being firm side-to-side.
- AIR VENTILATION SYSTEM, A third brace is positioned on the outer-lower part of the boot and features an air intake that can be operated by an aerodynamic shaped button.
- TECNO INSTEP TENSIONER, The Vortice features an additional fastening system on the front part of the foot, on the instep. It consists of a wrap-around fascia which can be precision adjusted by the TECNO INSTEP TENSIONER mechanism that was proved critical in rider safety by the previous model, the Sidi Vertigo Corsa.
- SHOCK ABSORBING HEEL CUP, A polyurethane shell holds a shock absorbing insert, visible from the outside through 4 small slits that mark out the look of the heel. The shell is mobile as it’s fixed to the boot by 2 screws that allow 3 mm of impact movement.
- SHIN PLATE, The shin plate is made in nylon and it is inserted on a polyurethane frontal support. Both parts are replaceable.
- VORTICE SLIDER, The toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert. All pieces are replaceable.
- RACING SRS SOLE, The all new sole is constructed of a polyurethane and rubber blend. It features a removable insert in front of the arch area where much wear and tear normally occurs due to sharp metal brake pedals and shift levers. Another patented-exclusive Sidi feature!
- GEAR CHANGE PAD. The gear change pad is molded of DuPont Techno-polymers, which ensure that the plastics qualities will not change in high or low temperatures.
- Price: $199.95
- Truly Free Shipping / No Handling Fee on orders over $100.00
|
|
|
|
|
|
|
|
|
Sixsixone - Flight II Hybrid Helmets
- The rear upper part of the boot is made up of the following mechanisms: TECNO CALF TENSIONER, TECNO SHIN TENSIONER and ANKLE SUPPORT SYSTEM. This group of features ensures a precise fit and maximum protection.
- The TECNO CALF TENSIONER mechanism adjusts the leg circumference. Placed in the back of the boots upper, it works through a nylon wire that hooks directly to the shin plate. The TECNO CALF TENSIONER is replaceable and it's available in different sizes to fit around various sizes of calf muscles.
- The TECNO SHIN TENSIONER mechanism helps the TECNO CALF TENSIONER close the leg upper on the front part of the boot. The two lateral nylon braces join the ankle joint with two screws that are protected by nylon caps. This system is reinforced with fiberglass, supports the ankle and is easy to replace. This system allows excellent flex movement front-to-back while being firm side-to-side.
- AIR VENTILATION SYSTEM, A third brace is positioned on the outer-lower part of the boot and features an air intake that can be operated by an aerodynamic shaped button.
- TECNO INSTEP TENSIONER, The Vortice features an additional fastening system on the front part of the foot, on the instep. It consists of a wrap-around fascia which can be precision adjusted by the TECNO INSTEP TENSIONER mechanism that was proved critical in rider safety by the previous model, the Sidi Vertigo Corsa.
- SHOCK ABSORBING HEEL CUP, A polyurethane shell holds a shock absorbing insert, visible from the outside through 4 small slits that mark out the look of the heel. The shell is mobile as it’s fixed to the boot by 2 screws that allow 3 mm of impact movement.
- SHIN PLATE, The shin plate is made in nylon and it is inserted on a polyurethane frontal support. Both parts are replaceable.
- VORTICE SLIDER, The toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert. All pieces are replaceable.
- RACING SRS SOLE, The all new sole is constructed of a polyurethane and rubber blend. It features a removable insert in front of the arch area where much wear and tear normally occurs due to sharp metal brake pedals and shift levers. Another patented-exclusive Sidi feature!
- GEAR CHANGE PAD. The gear change pad is molded of DuPont Techno-polymers, which ensure that the plastics qualities will not change in high or low temperatures.
- Price: $199.95
- Truly Free Shipping / No Handling Fee on orders over $100.00
|
|
|
|
|
|
|
|
|
Sixsixone - Flight II Hybrid LTD Helmets
- The rear upper part of the boot is made up of the following mechanisms: TECNO CALF TENSIONER, TECNO SHIN TENSIONER and ANKLE SUPPORT SYSTEM. This group of features ensures a precise fit and maximum protection.
- The TECNO CALF TENSIONER mechanism adjusts the leg circumference. Placed in the back of the boots upper, it works through a nylon wire that hooks directly to the shin plate. The TECNO CALF TENSIONER is replaceable and it's available in different sizes to fit around various sizes of calf muscles.
- The TECNO SHIN TENSIONER mechanism helps the TECNO CALF TENSIONER close the leg upper on the front part of the boot. The two lateral nylon braces join the ankle joint with two screws that are protected by nylon caps. This system is reinforced with fiberglass, supports the ankle and is easy to replace. This system allows excellent flex movement front-to-back while being firm side-to-side.
- AIR VENTILATION SYSTEM, A third brace is positioned on the outer-lower part of the boot and features an air intake that can be operated by an aerodynamic shaped button.
- TECNO INSTEP TENSIONER, The Vortice features an additional fastening system on the front part of the foot, on the instep. It consists of a wrap-around fascia which can be precision adjusted by the TECNO INSTEP TENSIONER mechanism that was proved critical in rider safety by the previous model, the Sidi Vertigo Corsa.
- SHOCK ABSORBING HEEL CUP, A polyurethane shell holds a shock absorbing insert, visible from the outside through 4 small slits that mark out the look of the heel. The shell is mobile as it’s fixed to the boot by 2 screws that allow 3 mm of impact movement.
- SHIN PLATE, The shin plate is made in nylon and it is inserted on a polyurethane frontal support. Both parts are replaceable.
- VORTICE SLIDER, The toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert. All pieces are replaceable.
- RACING SRS SOLE, The all new sole is constructed of a polyurethane and rubber blend. It features a removable insert in front of the arch area where much wear and tear normally occurs due to sharp metal brake pedals and shift levers. Another patented-exclusive Sidi feature!
- GEAR CHANGE PAD. The gear change pad is molded of DuPont Techno-polymers, which ensure that the plastics qualities will not change in high or low temperatures.
- Price: $199.95
- Truly Free Shipping / No Handling Fee on orders over $100.00
|
|
|
|
|
|
|
|
|
| Off Road Helmet Accessories |
| DESCRIPTION |
PHOTO |
QTY/ORDER |
PRICE
(USD) |
| TWENTY20 HELMET CAMERA SYSTEM (more info) |
|
$249.99 |
| TWENTY20 MOTORCYCLE CAMERA SYSTEM (more info) |
|
$299.99 |
| BLACK NYLON HELMET BAG WITH FLEECE LINING |
|
$14.95 |
| NYLON HELMET DUST COVER, BLACK (NOT ADVISED FOR USE ON WHITE HELMETS) |
|
$2.95 |
| BLACK QUICK CONNECTS, HASSLE-FREE CONNECTIONS FOR HELMET STRAP |
|
$9.95 |
| GOGGLE, AX ADULT SIZE, ANTI-SCRATCH, BLACK/RED/BLUE FRAME, BLACK/YELLOW STRAP |
|
$12.99 |
| BLACK, RED, BLUE OR WHITE QUICKSTRAP, KEEP YOUR GOGGLES IN PLACE |
|
$14.95 |
| 4 OZ. HELMET FRESH ODOR REMOVER |
|
$4.95 |
| 1/2 OZ. PLEXUS PLASTIC CLEANER |
|
$3.50 |
| 7 OZ. PLEXUS PLASTIC CLEANER |
|
$7.95 |
| 13 OZ. PLEXUS PLASTIC CLEANER |
|
$11.95 |
| 5 OZ. VARI-CLEAR ANTI-FOG SPRAY |
|
$7.95 |
| BLUE CHROME, RED CHROME, OR SILVER CHROME TROY LEE SPEED WING, INCLUDES MOUNTING KIT (VISUAL ENHANCER) |
|
$17.95 |
| CHROME TROY LEE HIGH TAIL HELMET LIGHT (INCREASES NIGHT VISIBILITY) |
|
$29.95 |
| HELMET LOCK EXTENSIONS (ENOUGH FOR 2 HELMETS) |
|
$8.99 |
| HJC WINDLIGHTS BLACK,SILVER COLOR |
|
$12.99 |
| CLICK HERE TO VIEW OUR COMPLETE LINE OF SCOTT GOGGLES |
| CLICK HERE TO VIEW OUR COMPLETE LINE OF FOX GOGGLES |
| CLICK HERE TO VIEW OUR COMPLETE LINE OF OAKLEY GOGGLES |
| CLICK HERE TO VIEW OUR COMPLETE LINE OF THOR GOGGLES |
| SCALA RIDER COMMUNICATIONS SYSTEMS (more info) |
|
|
|
View Cart | 
Checkout | 
Shipping, Policy & Information 
All major credit cards accepted here.
)
)
)
)
)
)
